are gradually favored by most customers. Some are sheltered from the rain and shade in front of the store, there are food stalls for supper, and some factories need temporary warehouses, etc. Sometimes it is necessary to shrink the entire membrane structure push-pull shed, but some customers do not know the push-pull technique, which makes it difficult to operate or waste time.
How to remove stains on push-pull tents?
First, fully open the membrane structure push-pull canopy, sprinkle with detergent or laundry detergent, gently brush with a soft brush, and rinse with clean water.
Can the push-pull tent be put away immediately when it gets wet?
It has just rained and the weather has been sunny or the sliding shed has just been cleaned, and it is still wet. It cannot be retracted immediately, which will speed up the damage of the tent. It can only be retracted after the film cloth is dry. It is recommended that it should be fully unfolded and allowed to dry naturally before shrinking.
When is the right time to clean a push-pull tent? Whether the sliding shed needs cleaning mainly depends on whether it is dirty?
1. Choose a sunny day, and use a soft brush to regularly clean the sliding shed.
2. Once the branches, leaves and other debris are found, they should be removed in time to avoid dividing the tarpaulin and reducing the bearing capacity of the canopy.
3. If there are small stains on the membrane cloth, you can use a soft brush dipped in ordinary detergent to clean the stains, and then rinse with water repeatedly until there is no foam.
How to clean other parts?
The frame of the push-pull tent is made of galvanized steel pipe. Try to avoid cleaning with chemical liquids or abrasive paper. Usually, you can clean it with a soft cloth and ordinary household cleaners.